Key Points Of Tilapia Cultivation Techniques On Large Water Surfaces

Mar 22, 2024 Leave a message

In recent years, many places have actively implemented the strategy of tilapia base production, vigorously promoting the cultivation of tilapia on large water surfaces. The high-yield and efficient aquaculture technology and management mode of pond aquaculture tilapia have been applied to the deep development of large water surfaces, completely changing the previous production situation of extensive and low yield and low efficiency on large water surfaces, and the production potential has been greatly improved. The cultivation of tilapia on large water surfaces can achieve significant economic benefits, and the water body is stable with low rent. As long as it is not used as a drinking water source or for other purposes, scientific development can achieve good harvests. The following is a brief description of the key technical points for cultivating tilapia on large water surfaces:

 

1, Clearing ponds and eliminating pests

This work is very important, but often overlooked by farmers. Its function is to sterilize and disinfect, remove pests, improve the breeding environment, and effectively prevent damage to the breeding species by large and fierce fish, reducing the competition between wild and free range fish for feed and water space. Large water surfaces with good water sources and easy drainage should be drained as much as possible. Dry cleaning has the best effect. Mix 50kg/mu to 75kg/mu of quicklime with hydrated slurry and sprinkle it all over the pool while it is hot. After exposure to sunlight for a period of time, inject water; Large water surfaces with poor water sources and difficult drainage can be cleaned with water. After lowering the water level as much as possible, tea cakes ranging from 40kg/mu to 50kg/mu can be applied to the entire pool at a depth of 1.0m, and the cleaning effect is also very good. In practical operation, it is important to promptly remove dead fish and bury them far away to avoid affecting water quality.

 

2, Cultivate water quality

Including two stages of water quality cultivation in the early stage of aquaculture and water quality cultivation in the later stage of aquaculture

Tilapia
Section. The early stage of aquaculture refers to the period when the average tail weight of the main fish is before 0.25kg, and the basic feed organisms that are suitable for fish are increased through fertilization and water, reducing the cost of aquaculture. In the past, farmers underestimated the investment in large-scale aquaculture and relied solely on feeding feed to raise fish. Initially, they were able to cope with this. However, as the fish grew and their food intake increased, funds were insufficient to meet the normal feeding needs of fish growth, and the products did not meet the specifications, resulting in losses; In recent years, to cope with the fluctuating aquatic product market, we have vigorously promoted the fish farming model that combines fertilizer, water, and feed, ensuring the steady development of fishery production. Large water surface fish farming has a large turnover of funds, and supplementing it with fertilized water fish farming can not only reduce costs but also resist risks. It is worth noting that all types of manure, including poultry and livestock manure, green manure, sugar factory filter mud, etc., should be disinfected and treated harmless before being applied to the water surface. Especially for poultry and livestock manure, it must be fermented and decomposed, disinfected with 1% to 2% quicklime water, and controlled at the source of poultry and livestock feed, drugs, additives, etc. to prevent harmful substances from affecting water quality through manure; Sugar factory filter mud is a new source of fishing fertilizer, containing a large amount of organic debris, which can be used for both fertilizing water and direct consumption by fish, with good results. The cultivation water quality in the later stage of aquaculture, that is, within 3 months before fish catch, organic fertilizer cannot be added. For large water surfaces with good water sources, new water can be injected. For large water surfaces with inconvenient water sources, composite microbial preparations can be used to remove organic pollutants in the aquaculture water, reduce harmful substances such as ammonia nitrogen, hydrogen sulfide, and nitrite, stabilize the pH of the water, inhibit the growth and reproduction of pathogenic microorganisms, increase dissolved oxygen in the water, and keep the water fresh and active. At the same time, funds can be concentrated to strengthen later feeding and promote the rapid growth and listing of fish.

 

3, Selecting good varieties

After years of production practice, the Oni tilapia has become the first main fish species in Gaozhou City due to its advantages of cold resistance, fast growth, and high male rate. The breeding technology of Oni tilapia requires high requirements, and it is difficult to produce fish fry with good body shape and high masculinity. If the male rate of Oni tilapia is not high, a large number of self breeding offspring will be produced after 4 months of stocking, and the breeding density will rapidly increase. A large number of larvae will consume oxygen and materials to seize space, leading to a dilemma in breeding. Therefore, selecting high-quality and high masculinity Oni tilapia is an important link in large-scale aquaculture. To ensure the quality of Oni tilapia fry, breeders should purchase fish species from tilapia breeding units that have obtained a production license for aquatic fry and have received widespread feedback from the public that the trial breeding effect is good. In actual production, it is not realistic to achieve full masculinity in the fry of tilapia. The solution is to release some carnivorous fish for hunting and removal. For example, releasing 100 to 300 freshwater white pomfrets per acre can achieve certain results.

 

4, Reasonable stocking

At present, aquatic products require high quality and good price. The term "high quality" here mainly refers to products that should meet the specifications and standards. In recent years, the purchase and sales of tilapia have mainly been divided into four specification levels, namely the average tail weight below 0.5kg, 0.5kg~0.8kg, 0.8kg~1.1kg, and 1.1kg above. There are also four corresponding product price levels, with a price difference of approximately 1 yuan/kg for each adjacent product. Based on the current production situation, simply feeding feed to produce products with an average tail weight of less than 0.5kg will result in a loss of about 1 yuan/kg. Therefore, reasonable stocking and significantly improving product specifications are urgent needs for aquaculture production. The recommended stocking density is 1000 to 1500 tilapia per mu, 100 to 300 freshwater white pomfrets per mu, 50 to 80 silver and bighead carp per mu, and 30 to 50 grass carp per mu. It is recommended to raise some mud carp appropriately. If the breeding conditions are poor, the main variety of tilapia should not exceed 1000 fish per acre. Actual production has shown that the yield of sparse cultivation is not lower than that of dense cultivation. After sparse cultivation, the yield per mu of many large water surfaces reaches more than 2 tons, and the product specifications and breeding profits have been synchronously improved. Generally, the profit per mu is above 2000 yuan, and the highest profit per mu reaches over 4000 yuan.

 

5, Scientific gains

The start and harvest of large-scale aquaculture are very important. A few years ago, there was a reservoir with an area of several hundred acres, and its main breeding species, Orochloa, had already reached commercial specifications. Due to intermittent fishing for a long time, the income from the production had to be used for the feed input of the stored fish, resulting in the situation where the stored fish ate the listed fish and ultimately suffered severe losses. Practice has proven that when fishing for one day, fish do not feed for three days, and their feeding is abnormal within a week. Even if there is fish feeding, there is still a situation where the consumption of food does not increase; Moreover, long-term net fishing can easily cause damage to fish bodies, even death, and gradually lead to weight loss and impairment. Therefore, it is important to start fishing quickly when the time is right to ensure the profitability of aquaculture. To achieve this, it is necessary to pay attention to the following issues: first, the specifications for free range fish should be as consistent as possible, fed evenly, and ensure that the vast majority of individuals meet the ideal commodity specifications at the same time; The second is to select the capture point accurately, and the feeding location should be set in a place that is easy to catch, to ensure that the fish in the capture area are dense and to shorten the capture cycle; Thirdly, pay attention to market information and strive to timely harvest during peak prices.